165+ Shed With Lawn Mower Storage

www.shednation.com

```html

Introduction: Shed + Mower Storage = Genius!

Want to keep your lawn mower and garden tools organized and protected from the elements? Building a small shed with dedicated lawn mower storage is a great DIY project that will enhance your backyard and keep your equipment in top condition. This post will guide you through a step-by-step process of constructing a small shed with a designated space for your mower.

Step 1: Planning and Design

Before you start hammering and sawing, careful planning is essential. Consider these factors:

Size: Determine the shed's dimensions based on your storage needs and available space in your yard. Don't forget to factor in extra room for movement. A common size is 6'x8' or 8'x10'.

Lawn Mower Storage: Designate an area specifically for your lawn mower. This might involve a ramp for easy access or a wider doorway.

Materials: Choose durable materials like pressure-treated lumber for the foundation and framing, plywood or siding for the walls, and roofing materials (shingles, metal, etc.).

Permits: Check local building codes and regulations to see if you need a permit for your shed.

Create a detailed plan or sketch, including dimensions and material lists. This will save you time and money in the long run.

Step 2: Building the Foundation

A solid foundation is crucial for the shed's stability. Here's how to build a basic foundation:

Clear the Area: Remove grass, debris, and topsoil from the shed's location.

Level the Ground: Ensure the ground is level using a level and a shovel.

Gravel Base: Add a layer of gravel (4-6 inches) to improve drainage and prevent moisture from wicking up into the shed. Compact the gravel with a tamper.

Foundation Frame: Build a rectangular frame using pressure-treated lumber. Make sure it's square and level. Use corner braces for added strength.

(Optional) Concrete Blocks: Place concrete blocks underneath the frame for added support and to keep the wood off the ground.

Step 3: Framing the Walls

Framing is the skeleton of your shed. Follow these steps:

Cut the Lumber: Cut studs (vertical supports), top plates, and bottom plates according to your plan.

Assemble the Walls: Nail or screw the studs to the top and bottom plates, spacing them 16 inches apart on center.

Frame the Door and Windows: Add headers (horizontal supports) above door and window openings to distribute the weight.

Raise the Walls: With help, carefully raise each wall and attach it to the foundation frame. Ensure the walls are plumb (perfectly vertical) and square.

Connect the Walls: Secure the walls together at the corners using nails, screws, and metal connector plates.

Step 4: Roofing

A sturdy roof protects your belongings from the weather.

Rafters or Trusses: Construct rafters or trusses according to your plan. Trusses are often easier to assemble, especially for larger sheds.

Install Rafters/Trusses: Attach the rafters or trusses to the top plates of the walls, ensuring they are evenly spaced and securely fastened.

Sheathing: Cover the rafters/trusses with plywood sheathing. Nail or screw the sheathing securely to the rafters.

Underlayment: Install roofing underlayment (felt paper or synthetic underlayment) to provide a waterproof barrier.

Roofing Material: Install your chosen roofing material (shingles, metal, etc.) according to the manufacturer's instructions.

Step 5: Siding and Exterior Finish

Siding provides protection and enhances the shed's appearance.

Install Siding: Attach your chosen siding material (plywood, wood siding, vinyl siding, etc.) to the wall framing. Overlap siding pieces correctly and use appropriate fasteners.

Trim: Add trim around the windows, door, and corners to give the shed a finished look and protect edges from the elements.

Paint or Stain: Apply paint or stain to the siding and trim to protect the wood and enhance the shed's appearance. Choose weather-resistant products.

Step 6: Door and Windows

Installing a door and windows provides access and ventilation.

Install the Door: Hang the door in the door frame, ensuring it swings freely and closes properly. Install hinges, a latch, and a handle.

Install Windows: Install windows in the window frames, ensuring they are sealed properly to prevent leaks.

Step 7: Lawn Mower Storage Area

Create a dedicated space for your lawn mower.

Ramp (Optional): Build a ramp leading up to the door for easy mower access. Use pressure-treated lumber and ensure the ramp is sturdy.

Reinforced Flooring: Reinforce the flooring in the lawn mower storage area to support the weight of the mower.

Shelving/Hooks: Install shelving or hooks for storing gardening tools and accessories.

Step 8: Finishing Touches

Complete the project with these finishing touches:

Interior Finishing (Optional): Add insulation, paneling, or other interior finishes to create a more comfortable and functional space.

Clean Up: Remove all debris and materials from the construction site.

Landscaping: Landscape around the shed to blend it into your yard.

Conclusion: Enjoy Your New Shed!

Congratulations! You've successfully built a shed with dedicated lawn mower storage. Enjoy the organization and protection your new shed provides for your lawn and garden equipment. Remember to maintain your shed regularly to ensure its longevity.

```

Cedarshed Studio 12x6 Shed [st126]

www.shednation.com

Wooden Storage Shed

shedsblueprints.com

Simple Storage Shed Designs For Your Backyard

coolsheddesigns.com